Product Introduction:
The ULE series is a reverse osmosis membrane element developed by Rixin Hengli, which currently has the highest water production and lowest operating pressure. By changing the production process conditions of the bottom membrane and composite membrane, altering the surface and chemical properties of the membrane, increasing the specific surface area and hydrophilicity, and maximizing the membrane flux. This component assembly system has the lowest total cost and can greatly improve the operational economy of the reverse osmosis system. Its operating pressure is about half of the operating pressure of ordinary brackish water desalination reverse osmosis membrane components, and the desalination rate can reach over 99%. Suitable for municipal water treatment.
Product advantages:
Has extremely high water flux and extremely low operating pressure
It can significantly reduce the energy consumption of the membrane system while also considering the desalination rate

Product Performance List:

Product Name	Model	Effective area		Inlet channel width	Water yield		Minimum desalination rate	Stable desalination rate	pH range	Maximum operating pressure	Test conditions
		(ft²)	(m²)	(mil)	(GPD)	(m³/d)	(%)	(%)
Series of ultra-low energy reverse osmosis membrane components	RTL-ULE8040-440/28	440	40.9	28	10000	37.8	98.0	98.5	2-11	600psi(41bar)	500ppm NaCI， 100psi,25℃，Ph=8.0,15% rate of recovery
	RTL-ULE8040FR-400/31	400	37.2	31	9000	34.1	98.0	98.5	2-11	600psi(41bar)
	RTL-ULE4040-90	90	8.4	31	2200	9.1	99.0	99.3	2-11	600psi(41bar)	1000ppmNaCI， 115psi,25℃，  Ph=8.0,15% rate of recovery
Note: ① Deviation range of water production rate ± 15% ② Special specification components such as membrane area, channel width, etc. can be customized according to specific customer requirements